Table of Contents
Advertisement
To mount the PS598-1 power supply unit on the rear panel of an IE switch, follow the steps
below:
1. Fit the PS598-1 power supply unit and the IE switch together
The two devices are equipped with positioning elements that must engage during
installation and protect the plug from excessive bending strain.
2. Screw the two devices to the mounting plates supplied with the main device
The maximum tightening torque of the screws is 0.5 Nm.
SCALANCE XR-500
Operating Instructions, 09/2018, A5E03275845-12
Assembling
5.8 Mounting power supply units
①
.
②
.
57
Advertisement
Table of Contents
