Cyclic Data Transmission; Commissioning; Function Check - Endress+Hauser Flowmeter Proline 200 Brief Operating Instructions

Commissioning

Device type ID
Device revision
DD Revision
CFF revision
For an overview of the different firmware versions for the device
7.1.2 Operating tools
The suitable device description file for the individual operating tools is listed in the table
below, along with information on where the file can be acquired.
Operating tool via
FOUNDATION Fieldbus
FieldCare
DeviceCare
• Field Xpert SFX350
• Field Xpert SFX370
AMS Device Manager
(Emerson Process Management)
Field Communicator 475
(Emerson Process Management)
7.2

Cyclic data transmission

For detailed information on cyclic data transmission, see the Operating Instructions
8 Commissioning
8.1

Function check

Before commissioning the measuring device:
‣
Make sure that the post-installation and post-connection checks have been performed.
• "Post-installation check" checklist→  12
• "Post-connection check" checklist →  27
34
0x1038 Device type parameter
Diagnostics → Device information → Device type
2 • On the transmitter nameplate
• Device revision parameter
Diagnostics → Device information → Device revision
Information and files under:
• www.endress.com
• www.fieldbus.org
Sources for obtaining device descriptions
• www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
• www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
Use update function of handheld terminal
www.endress.com → Download Area
Use update function of handheld terminal
Flowmeter Proline 200
Endress+Hauser