Detaching And Attaching The Oven Door - Siemens HB301 0Q Series Instruction Manual

:
Incorrect assembly!
Never move the frame before the two hooks are fully anchored
in the upper holes. The enamel could be damaged and may
break (figure C).
&
2. the two hooks must be inserted fully into the upper holes. Now
move the frame slowly and carefully downwards and insert in
the lower holes (figure D).
3. Insert both frames into the side walls of the oven (figure E).
If the rails are fitted correctly, the distance between the two upper
shelf positions is greater.
'

Detaching and attaching the oven door

For cleaning purposes and to remove the door panels, you can
detach the oven door.
The oven door hinges each have a locking lever. When the
locking levers are closed (figure A), the oven door is secured in
place. It cannot be detached. When the locking levers are open in
order to detach the oven door (Fig. B), the hinges are locked.
They cannot snap shut.
$
:
Risk of injury!
Whenever the hinges are not locked, they snap shut with great
force. Ensure that the locking levers are always fully closed or,
when detaching the oven door, fully open.
(
%
Detaching the door
1. Open the oven door fully.
2. Fold up the two locking levers on the left and right (figure A).
3. Close the oven door as far as the limit stop. With both hands,
grip the door on the left and right-hand sides. Close the door a
little further and pull it out (figure B).
$
Attaching the door
Reattach the oven door in the reverse sequence to removal.
1. When attaching the oven door, ensure that both hinges are
inserted straight into the opening (figure A).
2. The notch on the hinge must engage on both sides (figure B).
$
3. Fold back both locking levers (figure C). Close the oven door.
&
:
Risk of injury!
If the oven door falls out accidentally or a hinge snaps shut, do not
reach into the hinge. Call the after­sales service.
%
%
9