Ricoh RMY-P1 Field Service Manual page 94

5. Service Tables
Group (Tab)
TCP/IP
92
Item Selections
IP Address xxx.xxx.xxx.xxx
Subnet Mask xxx.xxx.xxx.xxx
Default
Gateway xxx.xxx.xxx.xxx
Address
Remarks
This setting is not available if DHCP is
enabled.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
The default setting is "192.0.0.192" when
DHCP is off.
This setting is not available if DHCP is
enabled.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
Will show all zero if network initialization is
not finished. Any change will be ignored
before the end of network initialization.
The default setting is "255.255.255.0" when
DHCP is off.
This setting is not available if DHCP is
enabled.
If this setting is changed, the printer power
must be turned off/on for the new setting to
take effect.
Will show all zero if network initialization is
not finished. Any change will be ignored
before the end of network initialization.
The default setting is "192.0.0.192" when
DHCP is off.