Preparing The Aircraft - dji PHANTOM 3 User Manual

Preparing the Aircraft

Removing Gimbal Clamp
Remove the gimbal clamp by sliding it to the right (when facing the nose of the aircraft), as shown below.
Attaching the Propellers:
Mount the propellers with black dots on to motors with black axes and spin counter-clockwise to secure.
Mount the propellers with sliver dots on to motors with sliver axes and spin clockwise to secure. Be sure
all propellers are securely in place.
Place all propellers onto the correct motors and tighten by hand to lock them in position.
Preparing the Remote Controller:
1. Twist the Phone Holder to face outwards and fix in position.
2 . Ensure the battery is fully charged.
3. Be sure S1 and S2 are switched to the upper most position. The LED will go green if the Remote Controller is
functioning.
S2
Phantom 3 Standard User Manual
S1
©
2015 DJI. All Rights Reserved.
7