Preparing The Aircraft; Preparing The Remote Controller - dji AGRAS T16 Quick Start Manual

Using the T16
1. Preparing the Intelligent Flight Battery
Only use DJI-approved flight batteries (model: AB2-17500mAh-51.8V). Check the battery level
before flying, and charge it according to the corresponding document.

2. Preparing the Aircraft

Unfold the M2 and M6 arms, and
tighten the two arm sleeves.
Unfold the propeller blades.
● Make sure that the battery is firmly attached to the aircraft. Only insert or remove the battery when it is powered off.
● When folding the arms, make sure to fold the M3 and M5 arms first, and then M2 and M6. Otherwise, the arms may be
damaged. Lift and lower the M1 and M4 arms gently to reduce wear and tear.

3. Preparing the Remote Controller

Charging the Battery
Press the battery level button once to check the battery level. Fully charge the batteries before initial use.
Unfold the M3 and M5 arms, then M1
and M4, and then tighten the four
arm sleeves.
Insert the Intelligent Flight Battery into
the aircraft until you hear a click.