Product Profile; Introduction; Preparing The Aircraft - dji MINI 2 User Manual

Product Profile

Introduction

DJI Mini 2 boasts a foldable design and an ultralight weight of less than 249 g. Featuring a Downward
Vision System and Infrared Sensing System, DJI Mini 2 can hover and fly indoors as well as outdoors
and automatically initiate Return to Home (RTH). With a fully stabilized 3-axis gimbal and 1/2.3"
sensor camera, DJI Mini 2 shoots 4K video and 12MP photos. Enjoy Intelligent Flight modes such as
QuickShots and Panorama, while QuickTransfer and Trimmed Download make downloading and editing
photos and videos more convenient and efficient.
DJI Mini 2 comes equipped with the DJI RC-N1 remote controller, which boasts DJI's long-range
transmission OCUSYNC
video quality of up to 720p from the aircraft to the DJI Fly app on a mobile device. The remote controller
works at both 2.4 GHz and 5.8 GHz, and is capable of selecting the best transmission channel
automatically without latency. The aircraft and camera can easily be controlled using the onboard
buttons.
DJI Mini 2 has a maximum flight speed of 36 mph (57.6 kph) and a maximum flight time of 31 minutes,
while the maximum runtime of the remote controller is six hours.
Maximum flight time was tested in an environment with no wind while flying at a consistent 10.5 mph
(17 kph) and the maximum flight speed was tested at sea level altitude with no wind. These values
are for reference only.
The remote controller reaches its maximum transmission distance (FCC) in a wide-open area with
no electromagnetic interference at an altitude of approx. 400 ft (120 m). The maximum transmission
distance refers to the maximum distance that the aircraft can still send and receive transmissions. It
does not refer to the maximum distance the aircraft can fly in a single flight. The maximum runtime
was tested in a laboratory environment and without charging the mobile device. This value is for
reference only.
5.8 GHz is not supported in some regions. This frequency band will automatically be disabled in
these regions. Observe local laws and regulations.

Preparing the Aircraft

All aircraft arms are folded before the aircraft is packaged. Follow the steps below to unfold the aircraft.
1. Remove the propeller holder.
2. Remove the gimbal protector from the camera.
3. In the following order, unfold the front arms, rear arms, and all the propellers.
©
6 2021 DJI All Rights Reserved.
TM 2.0 technology, offering a maximum transmission range of 6 mi (10 km) and