Matrice 30 Series Dock Bundle User Manual
Appendix
Aircraft Settings Using the Remote Controller
It is recommended to link the remote controller to the aircraft as controller B during on-
site flight tests. Users can modify aircraft settings using the remote controller based on
actual needs.
1. Run DJI Pilot 2, tap Enter Camera View on the homepage. Users will be directed to FPV
Camera view by default after finishing the preflight check.
Tap
on the upper-right to modify aircraft settings of each module:
a.
Sensing System Settings: set the horizontal and vertical obstacle braking distance
and the warning distance. Default values are recommended.
b.
RTK Module: enable Maintain Positioning Accuracy mode.
2. After the remote controller gain control over the gimbal camera, tap CAM on the
bottom-right corner, and then tap Infrared on the bottom-left corner to switch to the
Thermal Camera view.
Palette displays the highest and lowest temperature measurement values of the
current view. Tap to choose between different infrared temperature measurement
palettes.
Firmware Update
Using DJI FlightHub 2
1. Power on the aircraft and the dock. Ensure the aircraft is linked to the dock, and the
battery level of the aircraft is higher than 20%.
2. Open DJI FlightHub 2, and click Devices > Dock.
3. Click Update, and a prompt will appear in the window indicating the firmware version
and updates.
4. Select the multiple boxes on the left to upgrade device firmware in batches.
5. Click Update, the firmware will be downloaded automatically.
6. The firmware of both the dock and the aircraft will be updated simultaneously. If the
aircraft is not inside the dock, only the dock firmware will be updated.
7. The aircraft and the dock will restart automatically after the firmware update is done.
• Make sure DJI FlightHub 2 is connected to the internet during the whole update
process.
• The Intelligent Flight Battery installed on the aircraft will be updated to the latest
firmware version.
• Users cannot operate the aircraft or the dock during firmware update. The
aircraft and the dock will be available after the update is completed or cancelled.
74
©
2023 DJI All Rights Reserved.