①
Blender mixing cup
②
Mixing cup lid
③
Mixing cup
④
Mixing cup base
⑤
Stainless steel blade
⑥
Plastic blade
⑦
Pusher
⑧
Mixing bowl cover
⑨
Feed chute
5. Installation and operation
5.1 Safety instructions
WARNING! Risk of electric shock!
The device must only be connected to a properly installed single socket with
protective contact.
Never remove the power cable by pulling the cable itself; always grab the plug
housing.
•
Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•
Never place the device or other objects on the power cable.
•
Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
•
Do not use the device in case it does not function properly, has been damaged or
dropped.
⑩
Mixing bowl
⑪
Blade lock
⑫
Power transfer switch
⑬
Motor housing
⑭
Speed dial
⑮
Cutting disc for slicing with 2 slicing
thicknesses: 2 mm and 3 mm
⑯
Cutting disc for grating with one
grating thickness of 0.3 mm
⑰
Cutting disc for grating with two
thicknesses of 1 mm and 3.5 mm
⑱
Knife handle
- 27 -