Table of Contents
Advertisement
Display
Warning Indications
When an error is detected immediately after this unit is turned on or while it is being operated, the
status indicator, on-screen displays and the AG ROP application screen (during AG ROP
connection) inform you of the error.
System error
The battery is
depleted
(Low input voltage)
The card is full
Status indicator
On-screen display
AG ROP application screen
Meaning of the warning
Recording/playback
Solution
Status indicator
On-screen display
AG ROP application screen
Meaning of the warning
Recording/playback
Solution
Status indicator
On-screen display
AG ROP application screen
Meaning of the warning
Recording/playback
Solution
- 216 -
It flashes once per second.
s
[
] flashes four times per
WARNING
second.
A reference signal error or
communication error has occurred.
The operation stops.
Turn off and on this unit. If the warning
persists, consult your dealer.
It flashes once per second.
The message [LOW BATTERY.] is
displayed.
[
] lights up.
WARNING
The battery is depleted.
The operation stops. This unit turns off
automatically.
Charge or replace the battery.
Connect the AC adaptor to cancel the
warning.
s
The remaining recordable time flashes
red when it reaches [R 0h00m].
[
] lights up until you perform
WARNING
some operation after the recording.
The SD card capacity is full.
The recording stops.
Delete unnecessary scenes, or use a
new SD card.
Advertisement
Table of Contents
