Panasonic AG-UX170 Operating Instructions Manual page 28

Checking the remaining power of the battery
You can check the remaining power of the battery by looking at the battery capacity indication
displayed on this unit's screen or by looking at the supplied battery AG-VBR59.
∫ Checking the remaining power using this unit
Battery capacity indication
≥ The display changes as the battery capacity reduces.
If the battery discharges, then
≥ Depending on the menu setting, the battery capacity indication is not displayed
[DISP SETUP] # [CARD & BATTERY]
∫ Checking the remaining power using the battery
If you press the CHECK button when charging is not in progress, the indicator (LED lamps) will light
in green so that you can check the remaining power of the battery.

A CHECK button
Indicator
B
≥ The remaining power of the battery is an approximate guide.
≥ When the LED lamp does not light up even if you press the CHECK button, the battery is
exhausted. Charge the battery.
How to read the indicator
An approximate guide of the charging progress is indicated by the flashing position of the LED
lamps when charging is in progress. The LED lamps turn off when charging is complete.
:Flashing in green/
LED lamp status
When checking the
remaining power
≥ The display of the indicator is an approximate guide. When the battery pack is connected to the
video camera or the charger, refer to the remaining power display of the connected device. The
display of the connected device may differ from that of the battery pack's indicator.
will flash red.

:Lit in green/ :Off
During charging
- 28 -
# # #
Remaining power of the battery /
Charging progress
0% to 25%
25% to 50%
50% to 75%
75% to 100%
#
(l 198)