Table of Contents
Advertisement
(
only)
AG-UX180
[SDI AUDIO GAIN CHG]
This adjusts the gain value of audio signals output from the SDI OUT terminal.
≥ Set [OUTPUT SEL] to [SDI].
≥ (In Playback Mode)
Touch the play mode select icon, and set this unit to Motion Picture Playback Mode.
(l
116)
[0 dB]/[-6 dB]/[-12 dB]
≥ This function is not available in the following cases:
j When [OUTPUT SEL] is set to [HDMI] or [AV]
[DOWN CONV.]
This function allows you to select how to display images with a 16:9 aspect ratio on an external
monitor with a 4:3 aspect ratio.
≥ Set [RESOLUTION] to [DOWN CONV.].
[SIDE CROP]/[LETTERBOX]/[SQUEEZE]
[HDMI UHD OUTPUT LIMIT]
This sets a frame rate when outputting scenes in the recording format [UHD 2160/59.94p 150M] or
[UHD 2160/50.00p 150M] from the HDMI OUT terminal.
(When [SYSTEM FREQ] is set to [59.94Hz])
[59.94p]:
Outputs scenes in 2160/59.94p.
[29.97p]:
Outputs scenes in 2160/29.97p.
(When [SYSTEM FREQ] is set to [50.00Hz])
[50.00p]:
Outputs scenes in 2160/50.00p.
[25.00p]:
Outputs scenes in 2160/25.00p.
[HDMI TC OUTPUT]
Switches the output setting of time code information when this unit is connected to another device
(HDMI-SDI converter, etc.) with an HDMI cable.
≥ To remotely record scenes to the external device connected to the HDMI OUT terminal using the
USER button function [AUTO REC], select [ON].
≥ (In Playback Mode)
Touch the play mode select icon, and set this unit to Motion Picture Playback Mode.
(l
116)
[ON]/[OFF]
(l
132)
(l
(l
131)
(l
132)
(l
- 193 -
132)
100)
Advertisement
Table of Contents
