Panasonic AG-UX170 Operating Instructions Manual page 93

≥ Area mode is not possible in following cases:
j During Super Slow Recording
j In Variable Frame Rate Mode
j During AG ROP application connection
≥ Area mode is canceled in following cases:
j If you turn the unit off
j If you press the THUMBNAIL button
j If you switch to a [REC FORMAT] setting with a frame rate of 24.00p.
j When the setting of [ASPECT CONVERT] is changed
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC
≥ When using Area Mode, even if you set [ZEBRA] to [MARKER], the luminance display frame will
not be displayed. (l
In addition, the luminance level will not be displayed if [AREA MODE] is set to [FOCUS], [IRIS] or
[FOCUS/IRIS].
[FOCUS TRANS]
≥ Register [FOCUS TRANS] to a USER button.
≥ Switch to Manual Focus Mode.
With Focus Transition, you can move the current focus position to a pre-registered focus position.
(l 61)
[PUSH AUTO]
≥ Register [PUSH AUTO] to a USER button.
You can use the USER button as the PUSH AUTO button.
≥ Pressing the USER button or touching the USER button icon in Manual Focus Mode allows you
to use One Push AF.
≥ Pressing and holding the USER button or touching and holding the USER button icon in Manual
Focus Mode allows you to use Push AF.
[EVF/LCD DETAIL]
≥ Register [EVF/LCD DETAIL] to a USER button.
[EVF/LCD DETAIL] helps you achieve focus easier by emphasizing the outlines of an image
displayed on the LCD monitor or the viewfinder.
≥ These settings will not affect the images actually recorded.
(l 106)
(l 103)
99, 177)
(l 53)
(l 56)
(l
(l 146)
(l 169)
(l 84)
(l 84)
57)
(l 84)
(l 54)
- 93 -
(l 165)
(l 138)