Table of Contents
Advertisement
∫ Background recording
You can continue recording a motion picture by recording it on the SD card that is not set as a
recording destination in [MEDIA SELECT]
1 Slot 1
2 Slot 2
3 Press the recording start/stop button.
4 Press and hold the USER button to which
[BACKGROUND] is registered.
5 Recording is started
6 Recording is paused
≥ When the recording destination of motion pictures is set to [SD CARD 1] in [MEDIA SELECT],
[SD CARD 2] will be used for background recording. The following instructions assume that the
recording destination of motion pictures is set to [SD CARD 1].
is displayed beside the SD card display for card 2.
≥
BACKGR
How to use background recording
≥ Register [BACKGROUND] to a USER button.
1
Press the recording start/stop button to start recording.
≥ A motion picture will start being recorded to the two SD cards. (
≥ If you press the USER button to which [BACKGROUND] is registered, you can start recording
only to the SD card in card slot 2.
≥ For information on how to register a function to USER buttons, refer to page 84. For information
on how to use the USER button to which [BACKGROUND] is registered, refer to page 95.
2
Press the recording start/stop button again to stop recording.
≥ Recording to the SD card in card slot 1 will stop, but recording to the SD card in card slot 2 will
continue.
≥ You can repeat recording to the SD card in card slot 1 by pressing the recording start/stop button.
≥ You can stop background recording by pressing and holding the USER button to which
[BACKGROUND] is registered.
(l
42).
A Recording
(l
84)
- 183 -
will be displayed in red.)
BACKGR
Advertisement
Table of Contents
