Panasonic AG-UX170 Operating Instructions Manual page 143

∫ Points to check before copying
≥ When using an external media device for the first time, or using an external media device
that has been used with other devices, first run [FORMAT MEDIA].
≥ Before copying, go to [MEDIA STATUS] to check the amount of free space on the external media
device. (l 143)
≥ It may take longer to copy when there are many scenes.
≥ If you copy protected scenes or still pictures, the protection setting of the copied scenes or still
pictures are canceled.
≥ The order in which the scenes were copied cannot be changed.
Before you delete the data on the SD card after copying is complete, be sure to play back
the external media device to check that they have been copied to correctly.
∫ Formatting
This is for initializing the external media device.
≥ Please be aware that if a media is formatted then all the data recorded on the media is
erased and cannot be recovered. Back up important data on a PC etc.
≥ Connect this unit to the external media device and touch [Playback from External Media].
Select the menu.
MENU
: [OTHER FUNCTION] # [FORMAT MEDIA] # [EXTERNAL]
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Connect this unit and the external media device to format.
You may no longer be able to use the external media device if you format them on another device
such as a PC etc.
≥ This unit formats the external media device in exFAT.
∫ Displaying media information
The used space of the external media device can be checked.
≥ Connect this unit to the external media device and touch [Playback from External Media].
Select the menu.
MENU
: [OTHER FUNCTION] # [MEDIA STATUS]
≥ If you touch [CHANGE MEDIA], you can switch the display between the SD card 1, SD card 2,
and the external media device.
- 143 -
(l 145)