Table of Contents
Advertisement
Recording
Using the zoom
The unit can deliver a maximum optical zoom of 20k.
≥ (When the picture size of [REC FORMAT]
It can zoom up to approx. 30k when the [i.Zoom] is set to [ON].
≥ You can check the zoom magnification on-screen, displayed as a value between Z00 and Z99.
The value gets larger as you zoom in, and smaller as you zoom out.
≥ You can change the unit of the on-screen zoom magnification display by changing the [ZOOM
DISPLAY] setting in the [DISP SETUP] menu. You can also change the setting so that the on-
screen display does not appear.
≥ When [FOCUS MACRO] is set to [OFF], subjects at a distance of approximately 1.0 m to infinity
can be brought into focus. When [FOCUS MACRO] is set to [ON] and the zoom position is at the
W end, subjects at a distance of approximately 10 cm to infinity can be brought into focus.
(l
105, 176)
≥ If you take your finger off the zoom lever during zoom operation, the operation sound may be
recorded. When returning the zoom lever to the original position, move it quietly.
≥ The zoom magnification is maintained even after this unit is turned off.
(l
197)
T
T
W
W
T
T
W
W
W
W
Zoom ring 3
A
A
A side:
Wide-angle recording (zoom out)
B
B
B side:
Close-up recording (zoom in)
(l
165) is 1920k1080 or below)
Zoom lever 1/Sub zoom lever 2
T side:
Close-up recording (zoom in)
W side:
Wide-angle recording (zoom out)
- 49 -
(l
50)
Advertisement
Table of Contents
