Table of Contents
Advertisement
Phantom 130 Spot
●
For replacement use fuses of same type and rating only.
●
The user is responsible for correct positioning and operating of the device. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
●
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
●
Repairs, servicing and electric connection must be carried out by a qualified technician.
●
WARRANTY: Till one year after date of purchase.
●
Note: WARRANTY on batteries is only 6 months after date of purchase.
●
When your battery remains flat after fully charging or it doesn't function or doesn't charge anymore,
you can order a new battery. The spare part number for the battery is on request.
Operating Determinations
●
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●
The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
(This distance may differ depending on the model. The exact minimum distance will be
mentioned in the corresponding manual.)
●
To eliminate wear and improve lifespan, during periods of non-use, completely disconnect from
power via breaker or by unplugging.
●
The maximum ambient temperature t
●
The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
●
If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
●
If the Phantom is lowered from the ceiling or high joists, professional trussing systems have to be used.
●
Use a clamp to mount the Phantom, with the mounting bracket, to the trussing system.
●
The Phantom must never be fixed swinging freely in the room.
●
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
●
When rigging, derigging or servicing the Phantom, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.
Ordercode: 40073
= 40°C must never be exceeded.
a
4
Advertisement
Table of Contents
