Chapter 4 – Safety Devices
Danger
The Fall Restraint Anchor points are rated for Fall
Restraint only. A Fall Arrest System must not be
attached. Death or serious injury could result from
use of a Fall Arrest System.
The anchor points are positioned such that a Fall Re-
straint Lanyard can be set short enough to prevent the
operator reaching the fall hazard (when not all guard-
rails are in place) while still allowing some freedom of
movement.
Note
These anchors are not for lifting or tying down the
machine.
You should attach your fall protection to the anchors if
work rules require it.
Figure 4.15 – Fall Restraint Points
S2255RT S2755RT - 15286-1
19