Table of Contents
Advertisement
To update firmware, use Designer or Shure Update Utility (download at shure.com/suu).
Controlling Devices with Shure Designer Software
To control this device's settings, use Shure Designer software. Designer enables integrators and system planners to design au
dio coverage for installations using MXA microphones and other Shure networked devices.
To access your device in Designer:
1.
Download and install Designer on a computer connected to the same network as your device.
2.
Open Designer, and check that you're connected to the correct network in Settings.
3.
Click Online devices. A list of online devices appears.
4.
To identify devices, click the product icon to flash the lights on a device. Select your device in the list and click Config
ure to control device settings.
Learn more at shure.com/designer.
You can also access device settings using
How to Update Firmware Using Designer
Applies to Designer 4.2 and newer.
Before setting up devices, check for firmware updates using Designer to take advantage of new features and improvements.
You can also install firmware using
To update:
1.
Open Designer. If there's new firmware that you haven't downloaded yet, Designer shows a banner with the number of
updates available. Click to download firmware.
2.
Go to Online devices and find your devices.
3.
Choose a firmware version for each device from the Available firmware column. Make sure that no one is editing device
settings during an update.
4.
Select the checkbox next to each device you plan to update and click Update firmware. Devices may disappear from
Online devices during an update. Don't close Designer while updating firmware.
MXA902 Coverage
The MXA902 uses Single-Zone Automatic Coverage technology. There is one 20 x 20-foot (6.1 x 6.1 m) coverage area that
captures every talker in it with minimal configuration. The MXA902's integrated loudspeaker provides natural-sounding speech
reproduction for the entire coverage area.
To access microphone coverage settings:
•
Designer: Add the microphone to a room and go to Coverage map.
•
Web application: Go to Coverage.
Any talker in the blue coverage area has microphone coverage. Click and drag to move the coverage area up to 4 feet (1.2 m)
in any direction.
Shure Web Device
Discovery.
Shure Update Utility
for most products.
Shure Incorporated
11/38
Hide quick links:
Advertisement
Table of Contents
