Setup And Operation - Atlantic VERTIGO 50 Documentation For Installation And Use

Electric water heater
Hide thumbs Also See for VERTIGO 50:
Table of Contents

Advertisement

EN
SETUP & OPERATION
- NEVER POWER THE WATER HEATER WITHOUT WATER: Models with an electric
heating element will be certainly damaged.
- Fill the tank completely. Before powering up, open the hot water taps, drain the pipes
in order to empty the air.
- Check the tightness of the tubes and of the flange seal under the plastic cover. In case
of leaking tighten moderately. Check the operating of the hydraulic components and of
the safety valve.
- Turn the power on. After 15 to 30 minutes, depending of the capacity of the device, the
water should drip from the drain. This is normal and due to the expansion of water.
Check connection leaks and seal. During heating and according to the water quality, hot
water tanks can make a bubbling noise. This noise is normal and does not indicate any
defect of the unit.
The water heater features a digital screen that allows choosing the running
mode (see. drawing section 4 page 10).
1/ Mode selection knob (Ref. A): Enables to choose the running mode.
2/ Operating modes:
FROST FREE Mode
to reduce the electric consumption during the periods of absence of the user.
Mode (Ref. C): User selects a hot water temperature up to 70°)).
MANUAL
Warning: this operating mode may increase the electrical consumption of the product.*
SMART Mod
period, the product will adjust automatically the hot water temperature adapted to the user
consumption. This allows lowering of the electrical consumption.
BOOST Mode (Ref. E): Soft touch button to activate fast heating of the appliance. The BOOST
mode is automatically deactivated when full hot water is available.
Warning: no BOOST on FLAT 30
3/ Shower display (Ref. F):
Display of the quantity of hot water available. When a shower symbol is blinking,
this means that a shower is under production (heating in progress).
4/ Power indicator (Ref. G): This light appears when the water- heater is connected to power supply.
(Ref. B): Automatic regulation at frost-free temperature (7°C), in order
(Ref. D): Fully automatic operation of the water heater: after a learning
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vertigo 30Vertigo 80Vertigo 100

Table of Contents