Fan Speed; Rotate Display; Pwm Frequency - Chroma -Q Color Force II 72 User Manual

Fan Speed

4.11.
The internal fan of the fixture can be set to four speed options to regulate noise levels and the
cooling process.
TM
Note: Color Force II
To set the Fan Speed Mode,
1. On the Main Menu, tap Setup
2. Then tap Fan Speed option
3. On the Fan Speed screen, select a Fan Speed option, and then tap Apply to save

Rotate Display

4.12.
Display screen menu can be rotated 180° (upside down) by tapping on this button.
To set the orientation of the display,
On the Main Menu screen, tap Setup Menu.
1.
2. On the Screen Setup screen, tap RotateDisp
The display screen rotates by 180 degrees
3.

PWM Frequency

4.13.
The Color Force II™ has four frequency settings available -750 Hz, 1500 Hz, 3000Hz, 6000 Hz,
12000Hz, 24000Hz. This allows for the LED scan rate to be synchronized with the video camera and
avoid a flickering effect.
Tradeoff: Better dimming is achieved at lower frequencies; flickering effect is minimized at higher
PWM frequencies.
To set the Frequency,
1. On the Main Menu, tap Setup Menu
2. On the Setup screen, tap Frequency
3. On the Frequency screen, select and tap a Frequency option, then tap Apply to save
Color Force II™ User Manual V2.1
Quiet
Studio
Live
Live-
Quiet
unit is internally temperature protected at all times.
www.chroma-q.com
The internal fans are off and light output is reduced by
20%.
The fan speed is at low velocity and light output is at
100%.
The fan speed is at high velocity and the light output at
100%
Internal fans are turned off when all DMX values are at
0%.
15 Sep.. 2022