Dmx Data; Fan Speed; Rotate Display - Chroma Studio Force II V12 User Manual

4.1. DMX Data

This option allows user to see the DMX channel intensity levels, being received by the fixture. This DMX
channel entered will be formatted and displayed on this screen, based on selected mode and grouping. The
values read from 0 to 99 (as 0%- 100% intensity).
Current assigned
address
To show DMX Data,

4.2. Fan Speed

The internal fan of the fixture can be set to four speed options to regulate noise levels and the cooling
process.
Figure 13 (Fan Mode Select Screen)
TM
Note: Studio Force II unit is internally temperature protected at all times.
To set the Fan Speed Mode,

4.3. Rotate Display

Display screen menu can be rotated 180° (upside down) by tapping on this button.
To set the orientation of the display,
Studio Force II User Manual V1.1
Figure 12 (DMX Data Screen)
1. On the Main Menu, tap SETUP
2. Then tap DMX Data
3. The display shows the DMX start channel and the values (0-99) of the
DMX channels
4. Tap Escape to go to back
Quiet
Studio
Live
Live-
Quiet
1. On the Main Menu, tap Setup
2. Then tap Fan Speed option
3. On the Fan Speed screen, select a Fan Speed option, and then tap Apply
to save
1. On the Main Menu screen, tap Setup Menu.
2. On the Screen Setup screen, tap RotateDisp
3. The display screen rotates by 180 degrees
www.chroma-q.com
The internal fans are off and light output is reduced by
20%.
The fan speed is at low velocity and light output is at
100%.
The fan speed is at high velocity and the light output at
100%
Internal fans are turned off when all DMX values are at
0%.
19
Individual
Channel
Intensities
Aug. 2019