Control
2.6.
TM
Color Force II
fixtures can operate as a stand-alone unit or be controlled remotely via ANSI E1.11
USITT DMX 512-A protocol. The control function settings can be accessed through the touchscreen
LCD display at the rear of the fixture.
Power-up Screen:
No Power Menu Access: Insert a small blunt object, such as a
paperclip, into the hole to turn the display on and configure the
fixture when it is not connected to line power.
Color Force II™ User Manual V2.1
During the short time while the fixture powers on, you can see
the fixture type and firmware version. The firmware version is
also viewable from the Setup Menu.
www.chroma-q.com
4
Sep.. 2022