Chroma -Q Color Force II 72 User Manual page 5

PROTECTION FROM ELECTRIC SHOCK
•
Use only the cables specified in this manual and on the Chroma-Q
q.com to interconnect devices in the installation. If the specified cables are not long enough
for an intended cable run, consult Chroma-Q
alternative solution.
•
Provide a means of locking out AC mains power that allows power to the installation to be shut
down and made impossible to reapply, even accidentally, during work on the installation.
•
Shut down power to the installation during service and when it is not in use.
•
Before applying power to the installation, check that all power distribution equipment and cables
are in perfect condition and rated for the current requirements of all connected devices.
•
Isolate the installation from power immediately if any product, power cable or power plug is in
any way damaged, defective or wet, or if it shows signs of overheating.
•
Do not immerse a Chroma-Q
water jets.
PROTECTION FROM BURNS AND FIRE
•
The Color Force II
clearance of 10 mm (0.4 in.) in all directions.
•
Do not operate the Color Force II
F).
•
Do not modify the Color Force II
genuine Chroma-Q
PROTECTION FROM INJURY
•
Ensure that the installation hardware and supporting surface or structure can hold at least 10
times the weight of all the devices they support.
•
Block access below the work area and work from a stable platform whenever installing, servicing
or moving the Color Force II
•
As soon as work is completed, check that all hardware and components are securely fastened to
supporting structures.
•
Make sure there are no flammable materials close to the product during operation.
•
Make sure the power cord is not crimped or damaged.
•
Avoid direct eye exposure to the light source while the product is on.
•
Never try to repair the product. Repairs carried out by unskilled people can lead to damage or
malfunction and/or invalidate your warranty. Please contact the nearest authorized dealer or
contact support@chroma-q.com.
®
Chroma-Q Color Force II User Manual V2.2
®
Color Force II
TM
is fan cooled. Provide free airflow around the fixture and a minimum
TM
if the ambient operating temperature exceeds 40° C (131°
TM
in any way not described in this manual or install other than
®
parts. Use only accessories approved by Chroma-Q
TM
.
Keep this User Manual for future consultation. If this product is used by
another user, be sure that they also receive this document.
www.chroma-q.com
®
for assistance in finding or creating a safe
TM
fixture in water or expose it to high-pressure
iv
®
website at www.chroma-
®
.
Oct. 2022