Main Menu - Chroma -Q Color Force II 72 User Manual

Main Menu

Model Name
DMX Address & Orientation
Current assigned mode
Number of dedicated pixels
Once the unit is powered up, the display shows the Main Menu with:
•
The model name.
•
The DMX starting address and orientation.
•
Footprint: number of DMX slots used in the current configuration.
•
Mode: current assigned control mode and current dedicated pixels (or grouping) as per
selected grouping & control mode.
•
Current input status (DMX cable/DMX wireless/No data cable/No data Wireless).
Operational and control changes can be made by selecting any of the four configuration option buttons
shown in the picture above to access DMX (address), Mode, Setup and preset Looks operation.
L→R shows LED pixels will be controlled beginning at left, going towards right. This can be reversed by
choosing R→L in the Mode Menu options. Note: The "Left" side of the fixture is where power and data
enter; the "Right" side is where they exit.
The LCD is backlit when you access the menu. This will turn off when left undisturbed for 5 seconds.
Data Signal Indicator:
No Data
> > >DMX
DMX > > >
Color Force II™ User Manual V2.1
Shows the presence and status of DMX signal.
- appears when the fixture is set at RGB, HSI or RGBA mode
and not connected to an external DMX control console.
- appears when the fixture is set at RGB, HSI or RGBA mode
and receiving a DMX signal from an external DMX control
console is present.
-appears when the fixture is set at Master and outputting a DMX data
signal.
www.chroma-q.com
Data Signal/Source Indicator
DMX Channels used in current
configuration
Configuration option buttons
5 Sep.. 2022