Upload Engine; Firmware Version; Dmx Source; Engine Temp - Chroma -Q Color Force II 72 User Manual

Upload Engine

4.17.
RECOMMENDED ONLY FOR QUALIFIED PERSONNEL.
LED Engine software can be uploaded to the fixture from the Chroma-Q
menu. See Quick Start Guide of the Chroma-Q
Software for LED engines must be uploaded to the Color Force II
In "Setup", select "Upload Engines" then press Enter, and the display shows "Ready"
1.
Connect an XLR 5-pin cable from the Uploader to the unit
2.
Power-up the Uploader - display shows the file name, and "Ready"
3.
Press the "ERASE TARGET" button once to clear the target firmware
4.
Press the "Start Uploading" button once to execute the uploading
5.
6. An animated progress is displayed on the Uploader and CF unit indicating the upload
process
"UPLOADING DONE" appears on the Uploader upon completion of a successful
7.
upload and the target device resets to the Main Menu
Power-cycle the unit
8.
Note that the Chroma-Q

Firmware Version

4.18.
This option displays current software version of fixture at address Header. For added versatility,
Individual firmware versions of all the engines are also displayed.

DMX Source

4.19.
This enables the input connection.
Select the DMX source and press Apply.

Engine Temp

4.20.
Tap on this to see individual temperature in degrees Celsius of each engine in the fixture. Each engine
drive two cells.
Color Force II™ User Manual V2.1
®
Uploader II™.
®
Uploader II must be purchased separately.
INPUT
CABLE
WIRELESS Lumen Radio input
www.chroma-q.com
18
®
Uploader II by accessing this
TM
using the Chroma-Q
DMX from console via cable
®
Uploader II
Sep.. 2022