Fan Speed; Rotate Display; Pwm Frequency - Chroma Color Force II 12 User Manual

10.4 Fan Speed

The internal fan of the fixture can be set to four speed options to regulate noise levels and the cooling process.
TM
Note: Color Force II unit is internally temperature protected at all times.
To set the Fan Speed Mode,
1.
On the Main Menu, tap Setup
2.
Then tap Fan Speed option
3.
On the Fan Speed screen, select a Fan Speed option, and then tap Apply to save

10.5 Rotate Display

Display screen menu can be rotated 180° (upside down) by tapping on this button.
To set the orientation of the display,
1. On the Main Menu screen, tap Setup Menu.
2. On the Screen Setup screen, tap RotateDisp
3. The display screen rotates by 180 degrees

10.6 PWM Frequency

The Color Force has four frequency settings available -750 Hz, 1500 Hz, 3000Hz, 6000 Hz, 12000Hz, 24000Hz. This allows for the
LED scan rate to be synchronized with the video camera and avoid a flickering effect.
Tradeoff: Better dimming is achieved at lower frequencies; flickering effect is minimized at higher PWM frequencies.
To set the Frequency,
1.
On the Main Menu, tap Setup Menu
2.
On the Setup screen, tap Frequency
3. On the Frequency screen, select and tap a Frequency option, then tap Apply to save
TM
Chroma-Q Color Force II User Manual
Quiet The internal fans are off and light output is reduced by 20%.
Studio The fan speed is at low velocity and light output is at 100%.
Live The fan speed is at high velocity and the light output at 100%
Live-Quiet Internal fans are turned off when all DMX values are at 0%.
www.chroma-q.com
15
Version 1.1a