Control - Chroma Studio One 100 D User Manual

2.5 Control

The Studio One 100 D is controlled remotely via ANSI E1.11 USITT DMX512-A protocol or can operate as a standalone unit
with the wireless IR Remote. The control functions can be accessed through the LCD display at the rear of the fixture with 4
push buttons.
Back Arrow
Up Arrow
Down Arrow
Exit
Power-Up Display:
On power-up, the display shows the Brand, Model Name and Software Version for 5 seconds then goes on to show the Main
Menu. The Main Menu shows:
Model Name
•
DMX Status
•
DMX Address
•
Set Control Personality (Mode)
•
Number of Assigned Channels
•
Display Mode:
The LCD is backlit when you access the menus. This will switch off when left undisturbed for 10 seconds.
Personality:
The Studio One 100 D features a single Cold White LED engine which can be controlled through three Personality modes:
Display Ch
1-Dimmer 1 1 DMX channel for the control of all LEDs
2-Master The unit is set as the Master unit. All settings of the Master unit will be repeated on all Slave units.
3-Slave The unit is set as the Slave unit. All settings of the Slave units follow the Master unit.
Studio One 100 D User Manual
(Enter) Stores the menu choice
Increases (+) the mode level or value
Decreases (-) the mode level or value
Back to the previous menu
www.chroma-q.com
Description
6 V1.0 September 2015