Control - Chroma Studio Force V Phosphor User Manual

2.5 Control

The Studio Force V Phosphor fixture can operate as a standalone unit or remotely controlled via ANSI E1.11 USITT DMX512-
A protocol. The control functions can be accessed through the Touch Screen LCD display at the rear of the fixture.
Opening Screen on Power On:
Main Screen:
*Data Signal Indicator:
No Data
> > >DMX
DMX > > >
DMX line is busy!
When the warning screen appears, follow the display When the warning screen appears, follow the display text When the warning screen appears, follow the display When the warning screen appears, follow the display
The warning screen appears when a DMX signal from an external control console is plugged into the fixture set on Manual.
Press and hold the KHL Mode command button to change the mode.
•
The warning screen appears when the fixture is set to Manual with a DMX signal still present.
Remove the DMX cable.
•
Change the mode to Manual.
•
Studio Force V Phosphor User Manual
Brand Name
Fixture Name & Firmware
Version Number
Display On Pinhole
Fixture Name
*Data Signal Indicator
Control Information
Command Buttons
Shows the presence and status of DMX signal.
- appears when the fixture is set at KHL or RGBW mode and not connected to an
external DMX control console.
- appears when the fixture is set at KHL or RGBW mode and DMX signal from an
external DMX control console is present.
-appears when the fixture is set at Manual and also the source of the DMX data signal.
text prompts text text
www.chroma-q.com
6
prompts prompts. . . . prompts
V1.5 December 2014