Use Choke - Energizer EZG2200iUK User Manual

5.6 USE CHOKE

Pull the Choke Knob 1 fully out to "START" position.
"RUN" position
NOTE
⚫ The Choke is not required to start a warm engine. Push the
Choke Knob into the "RUN" position.
⚫ Keep the Choke Knob in "START" position for only 2 pulls of
the recoil starter. After second pull, push Choke Knob into the
"RUN" position for up to the next 3 pulls. Too much choke leads
to Spark Plug fouling/engine flooding due to the lack of
incoming air. This will cause the engine not to start.
1
- 36 -
"START" position