Maintenance; Using The Heart Rate Function - Matrix PERFORMANCE CLIMBMILL Manual

BEFORE YOU BEGIN

USING THE HEART RATE FUNCTION

The heart rate function on this product is not a medical device. While
heart rate grips can provide a relative estimation of your actual
heart rate, they should not be relied on when accurate readings are
necessary. Some people, including those in a cardiac rehab program,
may benefit from using an alternate heart rate monitoring system
like a chest or wrist strap. Various factors, including movement of
the user, may affect the accuracy of your heart rate reading. The
heart rate reading is intended only as an exercise aid in determining
heart rate trends in general. Please consult your physician.
WARNING!
Heart rate monitoring systems may be inaccurate.
Over exercising may result in serious injury or death.
If you feel faint, stop exercising immediately.
ENGLISH

MAINTENANCE

1. Any and all part removal or replacement must be performed by a qualified service technician.
2. DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country's local MATRIX dealer.
3. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain
important information. If unreadable or missing, contact your MATRIX dealer for a replacement.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating
equipment as well as keeping your liability to a minimum. Equipment safety levels can
only be maintained if inspections for damage and wear occur at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance or
repair of any kind is qualified to do so. MATRIX dealers will provide service
and maintenance training at our corporate facility upon request.
WARNING
Disconnect all power before servicing or moving the equipment. To remove power from
the ClimbMill, the power cord must be disconnected from the wall outlet. To clean,
wipe surfaces down with soap and slightly damp cloth only; never use solvents.
PERFORMANCE CLIMBMILL
A
A) Clean Auto Stop Sensors (2) monthly
B) Clean Control Zone IR sensors (6) monthly
8
B