Ac Input Requirements; Table 13. Acoustic Requirements; Table 14. Thermal Requirements - Intel SC5650HCBRP Product Specification

Intel® Server System SC5650HCBRP TPS
Operating Conditions
Maximum (1+0 & 1+1)
Operating (1+0 & 1+1)
Idle (1+0 & 1+1)
4.1.1.3 Temperature Requirements
The power supply operates within all specified limits over the T
in the following table. The average air temperature difference (ΔT
the power supply does not exceed 20 degrees C. All airflow passes through the power supply
and not over the exterior surfaces of the power supply.
Item Description
Top Operating temperature range
Tnon-op Non-operating temperature range
Altitude Maximum operating altitude
The power supply meets UL enclosure requirements for temperature rise limits. All sides of the
power supply, with exception of the air exhaust side, are classified as "Handle, knobs, grips, etc.,
held for short periods of time only." You must pay special attention to the fan case temperature;
it cannot be exceeded under any conditions.
4.1.1.4 LED Marking and Identification
The LED is green or amber when lit
4.1.2

AC Input Requirements

The 600-W power supply incorporates a universal power input with active power factor
correction, which reduces line harmonics in accordance with the EN61000-3-2 and JEIDA MITI
standards.
4.1.2.1 AC Inlet Connector
The AC input connector is an IEC 320 C-14 power inlet. This inlet is rated for 10A/250VAC.
Revision 1.2

Table 13. Acoustic Requirements

Inlet Temperature
Condition
45ºC
40°C
35°C

Table 14. Thermal Requirements

.
Intel order number E81443-002
% of Single module
Maximum Loading Condition
100%
60%
40%
temperature range described
op
) from the inlet to the outlet of
ps
MIN Max
0 45
-40 70
1524
(5,000)
Power Sub-system
LwAd (BA)
< 6.5
< 5.2
< 4.0
Units
°C
°C
m
(ft)
57