Advertisement
4
INSTALLATION
When requesting information or spare parts from our Sales Department, quote
the exact identification code of the model together with the manufacture
number.
This manual, along with any other manuals and other documents which are
delivered with the booster set, is an integral part of the operating instructions.
This manual aims to provide information and instructions essential to adequately
perform all activities related to the use of the product purchased. This manual, and
documentation, are intended to be viewed by all persons involved in the life cycle
of the booster set and therefore must be accessible to the user.
Compliance with all safety requirements is an obligation of the customer.
The following instructions and requirements relate to the standard operations; for
instructions, situations and events that are not covered in the present manual or
sales documents, contact our assistance service.
The installation must be designed and carried out only by qualified technicians;
Errors in the installation or use can cause serious damage to the equipment, the
user system and the people involved.
Do not make any action, maintenance, repairs or modifications that you do not
have specific knowledge or received detailed instructions. If doubts remain, after
consultation with the following paragraphs, surveyed Fluid Water Solutions Ltd. All
operations must be carried out while respecting the safety rules.
Remember that you respect the regulations in force in the country of
installation: if different rules are in force on the same topic, you should always
consider the more stringent requirements.
Our products have been manufactured in accordance with the applicable safety
standards in force for which it is recommended the use of all devices or notices in
order that the use does not cause injury to persons or damage to belongings.
Our products were designed for the specific use intended, THEREFORE ANY
OTHER USE THAT IS DIFFERENT AND NOT IN ACCORDANCE WITH WHAT
INDICATED, EXEMPTS STRUART TURNER LTD FROM RISKS that may occur.
The modification of both mechanical and electrical parts of the machine is strictly
prohibited. The non-compliance exempts Stuart Turner Ltd from any responsibility.
The responsibility of any operation that has not been authorised in writing shall fall
upon the executor, inasmuch that they become the manufacturer.
8
Advertisement
