Table of Contents
Advertisement
Quick Links
STUART
Installation, Operation & Maintenance
Instructions
Please leave this instruction booklet with the owner as it contains
important warranty, maintenance and safety information
Read this manual carefully before commencing installation.
This manual covers the following products suitable for 230/1/50 supply.
Multistage CH4–30
Pt. No. 46553
Multistage CH4–50
Pt. No. 46555
Multistage CH4–40
Pt. No. 46554
Multistage CH4–60
Pt. No. 46556
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stuart Turner STUART 46553
Summary of Contents for Stuart Turner STUART 46553
- Page 1 STUART Installation, Operation & Maintenance Instructions Please leave this instruction booklet with the owner as it contains important warranty, maintenance and safety information Read this manual carefully before commencing installation. This manual covers the following products suitable for 230/1/50 supply. Multistage CH4–30 Multistage CH4–40 Pt.
-
Page 2: Table Of Contents
Arabic Installation Operation & Maintenance Instructions ....25 English (GB) Installation Operation & Maintenance Instructions ....2 PRODUCT DESCRIPTION Electric motor driven centrifugal pump. - Page 3 WARNINGS: This pump set must not be used for any other application without the written consent of Stuart Turner Limited. Do not connect this pump to the mains water supply. This appliance can be used by children aged from ...
- Page 4 If the supply cord is to be changed or is damaged, it must be replaced with a special cord assembly available from Stuart Turner or one of their approved repairers. Please read installation details carefully as they are intended to ensure this product provides long, trouble free service.
-
Page 5: Checklist
Outlet port removed from its packaging check for any damage prior to installation. If any damage is found contact Stuart Turner Ltd within 24 hours of receipt. Inlet port Fig. 1 Your product may vary slightly from the picture above. -
Page 6: Important Facts - Read Before Commencing Installation
1 IMPORTANT FACTS: READ BEFORE COMMENCING PUMP INSTALLATION A Water storage capacity. 1.11 The water storage capacity must be sufficient to meet the flow rates required by the pumped equipment and any other water using fittings and appliances, which may be operated simultaneously. DO NOT RUN PUMP DRY. 1.12 Ensure the pump is primed as described in the priming section before starting, damage to the shaft seal will result otherwise. -
Page 7: Location
2 LOCATION – GENERAL 2.11 Access: For emergencies and maintenance the pump must be easily accessible. 2.12 Protection: The pump must be located in a dry position, frost free and protected from freezing. 2.13 Ventilation: Ensure an adequate air flow to cool the pump. Separate the pump from other appliances that generate heat. -
Page 8: Electrical Installation
3 ELECTRICAL INSTALLATION / EARTHING 3.11 Regulations: The electrical installation must be carried out in accordance with the current local regulations by a qualified person. 3.12 Safety: In the interests of electrical safety a 30 mA residual current device (R.C.D. not supplied) should be installed in the supply circuit. This may be part of a consumer unit or a separate unit. - Page 9 3.21 If the supply cord is to be changed or damaged, it must be replaced by a special cord available from Stuart Turner or one of its approved repairers. 3.22 Cable Gland Fitting Instructions: To enable correct assembly of the cable gland the ‘O’-ring (Fig.
-
Page 10: Plumbing
This product is maintenance free for its life, however it is a mechanical product and will eventually show signs of wear. Spare parts are available, for more information phone the Stuart Turner TechAssist team on +44 (0) 800 31 969 80. -
Page 11: Technical Specification
11.6 Kg 16.8 Kg 19.3 Kg Stuart Turner reserve the right to amend the specification in line with its policy of continuous development of its products. *Note: The maximum pressure that can be applied to the pump under any installation conditions. -
Page 12: Trouble Shooting
Check fuse (see fuse section). Check circuit breaker is set. Check wiring connections. Pump Jammed. If motor ‘Buzzes’ switch off power and contact Stuart Turner. Internal motor Wait for thermotrip to auto-reset and thermotrip activated. check that duty point and run time is within specification (see technical specification). -
Page 13: Guarantee
Proof of purchase should accompany the returned unit to avoid delay in investigation and dealing with your claim. You should obtain appropriate insurance cover for any loss or damage which is not covered by Stuart Turner Ltd in this provision. Please record here for your records. TYPE NO. - Page 14 7. ﺿامن ﳌﺪة ﻋﺎﻣني TechAssist +44 (0) 800 31 969 80 ﺗﺎرﻳﺦ اﻟ ﴩ اء اﻟﺮﻗﻢ اﻟﺘﺴﻠﺴﲇ رﻗﻢ اﻟﻨﻮع - 14 –...
- Page 15 6. اﺳﺘﻜﺸﺎف اﻷﻋﻄﺎل وإﺻﻼﺣﻬﺎ اﻹﺟ ﺮ اء اﳌﻮﴅ ﺑﻪ اﻟﺴﺒﺐ اﳌﺤﺘﻤﻞ اﻷﻋ ﺮ اض 4.11 6.11 :ﺣامﻳﺔ اﻟﺒﻴﺌﺔ - 15 –...
- Page 16 5. اﳌﻮاﺻﻔﺎت اﻟﻔﻨﻴﺔ CH4–60 CH4–50 CH4–40 CH4–30 50 Hz 50 Hz 50 Hz 50 Hz ﻃ ﺮ از اﳌﻀﺨﺔ 46556 46555 46554 46553 1601035 0.05 ¼ 1 60 1 1969 1648 1182 0.75 19.3 16.8 11.6 11.1 5.11 :اﻟﻀﺠﻴﺞ...
- Page 17 4. أﻋامل اﻟﺴﺒﺎﻛﺔ :أﻋامل اﻷﻧﺎﺑﻴﺐ 4.11 :ﺻامﻣﺎت اﻟﻌﺰل 4.12 4.13 :ﺷﻄﻒ اﻟﻨﻈﺎم 4.14 :اﻹﻗﻼع 4.15 ﻻ ﺗﻘﻢ أﺑﺪ ا ً ﺑﺘﺸﻐﻴﻞ اﳌﻀﺨﺔ ﻋﻨﺪﻣﺎ ﺗﻜﻮن ﺻامﻣﺎت ﻋﺰل اﻹدﺧﺎل و/أو اﻹﺧ ﺮ اج ﰲ وﺿﻊ اﻹﻏﻼق. ﺣﻴﺚ !ﻳﺆدي ذﻟﻚ إﱃ ﺣﺪوث ﺗﻠﻒ 4.16 :اﻟﺼﻴﺎﻧﺔ...
- Page 18 :اﳌﺼﻬﺮ 3.19 :اﺳﺘﺒﺪال ﺳﻠﻚ اﻟﺘﺰوﻳﺪ ﺑﺎﻟﻄﺎﻗﺔ 3.20 ﻳﻨﺒﻐﻲ ﺗﻮﺟﻴﻪ اﻷﺳﻼك اﻟﺪاﺧﻠﻴﺔ اﳌﻮﺟﻮدة ﰲ اﻟﺼﻨﺪوق اﻟﻄﺮﰲ وﺷﺪﻫﺎ ﺑﺈﺣﻜﺎم ﻟﻀامن اﻻﻟﺘ ﺰ ام ﺑﺎﳌﻌﻴﺎر . ﻣﻦ اﻟﴬوري ﻗﺒﻞ ﺣﺪوث أي ﺗﺸﻮﻳﺶ ﰲ ﻫﺬه اﻷﺳﻼك اﻟﺪاﺧﻠﻴﺔ، أن ﻳﺘﻢ اﻟﻜﻬﺮﺑﺎيئ 1-60335 IEC .ﺗﺪوﻳﻦ ﺗﻔﺎﺻﻴﻞ ﺗﻮﺟﻴﻬﻬﺎ وﺷﺪﻫﺎ ﺑﻌﻨﺎﻳﺔ ﻟﻀامن إﻋﺎدة ﺗﺠﻤﻴﻌﻬﺎ دامئ ﺎ ً وﻓﻖ ﻧﻔﺲ اﻟﻨﻤﻂ اﳌﺘﺒﻊ ﰲ اﳌﺼﻨﻊ 3.21 :ﺗﻌﻠﻴامت...
- Page 19 3. اﻟﱰﻛﻴﺐ اﻟﻜﻬﺮﺑﺎيئ / اﻟﺘﺄرﻳﺾ :اﻷﻧﻈﻤﺔ 3.11 :اﻟﺴﻼﻣﺔ 3.12 ()اﻷداة اﻟﺘﻲ ﺗﻌﻤﻞ ﺑﺎﻟﺘﻴﺎر اﳌﺘﺒﻘﻲ ﻏري ﻣﺰودة 3.13 ﻻ 3.14 :اﻟﺘﺄرﻳﺾ 3.15 :اﻟﺘﻮﺻﻴﻼت 3.16 :متﺪﻳﺪ أﺳﻼك وﺣﺪة اﻟﺘﻮﺻﻴﻞ 3.17 .ﺗﺤﺬﻳﺮ: ﻳﺠﺐ ﺗﺄرﻳﺾ ﻫﺬا اﻟﺠﻬﺎز :ﻣﺨﻄﻂ متﺪﻳﺪ اﻷﺳﻼك 3.18 - 19 –...
- Page 20 2. اﳌﻜﺎن – ﻋﺎم :اﻟﻮﺻﻮل 2.11 :اﻟﺤامﻳﺔ 2.12 :اﻟﺘﻬﻮﻳﺔ 2.13 2.14 :اﻟﺴﻼﻣﺔ :اﺣﺘﺒﺎس اﳌﺎء 2.15 :وﺿﻊ اﳌﻀﺨﺔ 2.16 :ﺗﺜﺒﻴﺖ ﻗﺪم اﻟﺘﻌﻠﻴﻖ ﺑﺈﺣﻜﺎم 2.17 - 20 –...
- Page 21 ﺣﻘﺎﺋﻖ ﻣﻬﻤﺔ: ﻳﺮﺟﻰ اﻟﻘ ﺮ اءة ﻗﺒﻞ اﻟﴩوع ﺑﱰﻛﻴﺐ اﳌﻀﺨﺔ .ﺳﻌﺔ ﺗﺨﺰﻳﻦ اﳌﺎء 1.11 .ﻻ ﺗﻘﻢ ﺑﺘﺸﻐﻴﻞ اﳌﻀﺨﺔ ﰲ ﺣﺎل ﻋﺪم وﺟﻮد ﻣﺎء ﺿﺦ 1.12 درﺟﺔ ﺣ ﺮ ارة اﳌﺎء 1.13 1.14 درﺟﺔ اﻟﺤ ﺮ ارة اﳌﺤﻴﻄﺔ 1.15 ﻻ 1.16 80 969 31 800 أﻋامل...
- Page 22 ﻗﺎمئﺔ اﻟﺘﺤﻘﻖ ﻫﺎم: ﻋﻨﺪ إ ز اﻟﺔ اﳌﻀﺨﺔ ﻣﻦ ﻋﺒﻮﺗﻬﺎ، ﻗﻢ ﺑﺎﻟﺘﺤﻘﻖ ﻣﻦ ﻋﺪم وﺟﻮد ﺗﻠﻒ ﻓﻴﻬﺎ ﻗﺒﻞ اﻟﴩوع ﰲ ﺗﺮﻛﻴﺒﻬﺎ. ﰲ ﺣﺎل ﺗﺒني Stuart Turner Ltd وﺟﻮد أي ﺗﻠﻒ، ﻗﻢ ﺑﺎﻻﺗﺼﺎل ﺑﴩﻛﺔ .ﺳﺎﻋﺔ ﻣﻦ اﻻﺳﺘﻼم ﰲ ﻏﻀﻮن - 22 –...
- Page 23 ﰲ ﺣﺎﻟﺔ ﺗﻠﻒ ﺳﻠﻚ اﻹﻣﺪاد ﺑﺎﻟﻜﻬﺮﺑﺎء أو ﺗﻐﻴريه، ﻓﻴﺠﺐ اﺳﺘﺒﺪاﻟﻪ مبﺠﻤﻮﻋﺔ اﻷﺳﻼك . أو أﺣﺪ ﻣﺴﺆوﱄ اﻹﺻﻼح اﳌﻌﺘﻤﺪﻳﻦ ﻟﺪﻳﻬﺎStuart Turner اﻟﺨﺎﺻﺔ اﳌﺘﻮﻓﺮة ﻣﻦ ﴍﻛﺔ ﻳﺮﺟﻰ ﻗ ﺮ اءة ﺗﻔﺎﺻﻴﻞ اﻟﱰﻛﻴﺐ ﺑﻌﻨﺎﻳﺔ ﻛﻮﻧﻬﺎ ﻣﺨﺼﺼﺔ ﻟﻀامن أن ﻳﻘﻮم ﻫﺬا اﳌﻨﺘﺞ ﺑﺘﻘﺪﻳﻢ ﺧﺪﻣﺔ ﻟﻮﻗﺖ أﻃﻮل دون أي ﻣﺸﺎﻛﻞ. ﻛام...
- Page 24 :ﺗﺤﺬﻳﺮ ﻳﺠﺐ ﻋﺪم اﺳﺘﺨﺪام ﻣﺠﻤﻮﻋﺔ اﳌﻀﺨﺔ ﻫﺬه ﻷي ﺗﻄﺒﻴﻖ آﺧﺮ دون اﻟﺤﺼﻮل ﻋﲆ اﳌﻮاﻓﻘﺔ .Stuart Turner Limited اﻟﺨﻄﻴﺔ ﻣﻦ ﴍﻛﺔ .ﻻ ﺗﻘﻢ ﺑﺘﻮﺻﻴﻞ ﻫﺬه اﳌﻀﺨﺔ ﺑﺨﻄﻮط اﳌﺎء اﻟﺮﺋﻴﺴﻴﺔ ميﻜﻦ ﻟﻸﻃﻔﺎل اﻟﺒﺎﻟﻐني ٨ أﻋﻮام ﻓﺄﻛرث واﻷﺷﺨﺎص اﻟﺬﻳﻦ ﻳﻌﺎﻧﻮن ﻣﻦ ﻧﻘﺺ ﰲ اﻟﻘﺪ ر ات...
-
Page 25: Arabic Installation Operation & Maintenance Instructions
ﺗﻔﺎﺻﻴﻞ اﳌﻨﺘﺞ اﻟﺘﻄﺒﻴﻖ .ﻳﺠﺐ أﻻ ﻳﺘﺠﺎوز اﻟﻀﻐﻂ اﻟﺪاﺧﻞ إﱃ اﳌﻀﺨﺔ ودرﺟﺔ اﻟﺤ ﺮ ارة اﳌﺤﻴﻄﺔ اﻟﻘﻴﻢ اﳌﺬﻛﻮرة ﰲ اﳌﻮاﺻﻔﺎت اﻟﻔﻨﻴﺔ اﻟﺘﺨﺰﻳﻦ اﳌﺤﺘﻮﻳﺎت - 25 –... - Page 26 - 26 –...
- Page 27 - 27 –...
- Page 28 Signed ..........Stuart Turner are an approved company to BS EN ISO 9001:2015...
Need help?
Do you have a question about the STUART 46553 and is the answer not in the manual?
Questions and answers