Locking The Controls; Overheat Sensor; Residual Heat Indicator - Proline VH 23 T Operating Instructions Manual

Locking the controls
• You can lock the controls to prevent unintended use (for example
children accidentally turning cooking zones on).
• When the controls are locked, all controls except the ON/OFF
control are disabled.
To lock the controls
Touch the key lock control. "Lo" will flash on the timer display,
indicating that the controls are locked.
NOTE: You can always turn the hob off in an emergency, but the
controls will still be locked when you turn the hob on again. Unlock
the controls first before operating the hob.
To unlock the controls
1. Make sure the hob is turned on.
2. Touch and hold the key lock control for 2 seconds. "Lo" will
disappear.
3. You can now start using the hob.
Overheat sensor
The hob is equipped with a sensor that monitors the temperature
inside the hob. The hob will automatically turn off if this temperature
becomes excessive.
Residual heat indicator
After intensive use, the cooking zone may remain hot. "H" will flash
on the display after switching off a cooking zone or the complete
stop of the hob.
"H" will disappear when the cooking zones may be touched without
danger.
As far as "H" is flashing, do not touch the cooking zones and put any
heat‐sensitive object on them. There are risks of burn and fire!
16