Ethernet; Function Indicators; Port - Balluff BNI EIP-502-105-R015 User Manual

4 Technical Data

4.5. Ethernet

4.6. Function
Indicators
Module Status
www.balluff.com
Ethernet IP port
Connection for Ethernet IP port
Cable types in accordance with
IEEE 802.3
Data transmission rate
Max. cable length
Flow control
Status LEDs
LED Display
Green
UA Red, flashing
Red
Green
US
Red, flashing
Green, flashing
Green
Mod
Red, flashing
Red-green, flashing
Off
Green, flashing
Netw
Green
ork
Red, flashing
Red-green, flashing
Off
100
Yellow
LNK Green
2 x 10Base/100Base Tx
M12, D-coded, female
Shielded, twisted pair min. STP CAT 5/ STP CAT 5e
10/100 Mbps
100 m
Half-duplex/full-duplex (IEEE 802.33x pause)
Description
Output power OK
Low output power (< 18V)
No output power (< 11V)
Input power OK
Low input power (< 18V)
Incorrect or no configuration of the module
Module is working
Fixed bus clock is not possible
Initial sequence
Module has no IP address
Module has IP, but no connection established
Connection established
Connection timeout
Initial sequence
Bus clock: 10 Mbps
Bus clock: 100 Mbps
Data transfer
Port LEDs
9