Ethernet; Function Indicators; Module Status - Balluff BNI ECT-508-105-Z015 User Manual

4 Technical data

4.5. Ethernet

4.6. Function
indicators

Module status

www.balluff.com
Ethernet port
Connection for Ethernet port
Cable types in accordance with
IEEE 802.3
Data transmission rate
Max. cable length
Flow control
LED Display
Green
US
Red, flashing
Green
UA
Red, flashing
Red
off
Green, flashing
RUN
Green, single flashing
Green
off
Red, flashing
ERR Red, single flashing
Red double flashing
Red
off
100
Yellow
L/A Green
2 x 100Base-Tx
M12 socket, D-coded
Shielded, twisted pair min. STP CAT 5/ STP CAT 5e
100 Mbit/s
100 m
Half-duplex/full-duplex (IEEE 802.33x pause)
Status LEDs: Module status
Port/pin LEDs:
Status of IO-Link and I/O ports
Function
Sensor supply OK
Sensor supply less than < 18 V
Output voltage OK
Output voltage low (< 18 V)
No output voltage present (< 11V)
The device is in the INIT state
The device is in the PRE-OPERATIONAL state
The device is in the SAFE OPERATIONAL state
The device is in the OPERATIONAL state
No error
Invalid configuration
Local error
Application watchdog timeout
Error in the application
Transmission rate 10 Mbit/s
Transmission rate 100 Mbit/s
Data transfer
9