Table of Contents
Advertisement
Quick Links
PD9000 ConsoliDator+
Multivariable Controller
Field Mount
•
NEMA 4X Panel or Field Mount Multi-Channel Controller
•
Convenient Display, Control, & Alarm of Multiple 4-20 mA & Pulse Inputs
•
Numeric & Bargraph Color Display (320 x 240 pixels) 5.7" (145 mm)
•
Sunlight Readable Display, White Backlight
•
Isolated 24 VDC Transmitter Supplies 200 mA / Analog Input; 1,600 mA Max
•
99 Channels, 32 Totalizers, 32 Timers, & 199 Modbus Slave Inputs
•
64 High & Low Alarms assigned to up to 25 Relays with AND/OR Logic
•
Modular Design for Input & Output Flexibility
•
Up to (28) 4-20 mA Isolated Inputs or Pulse Inputs
•
Up to (25) 10 Amp Form C Relays (With Eight Analog or Pulse Inputs)
•
Up to (25) Isolated 4-20 mA Outputs (With Eight Analog or Pulse Inputs)
•
Operating Temperature Range: -40 to 60°C (-40 to 140°F)
•
Pulse, Analog, & Modbus Input Flow Rate / Total / Grand Total Capability
•
50-Point Linearization, Square Root, and Exponent for Open Channel Flow
•
Round Horizontal Tank Volume Calculation; Just Enter Diameter & Length
•
Multi-Pump Alternation Control or Simple On / Off Control
•
Programmable Displays, Function Keys & Digital Inputs
•
Math Functions: Sum, Diff, Average, Multiply, Divide, % Efficiency, & More
•
Display Direct Modbus PV Inputs – Slave Mode
•
RS-485 Modbus RTU Standard & Ethernet Modbus TCP/IP Optional
•
Free ConsoliDator+ Configuration Software
•
3 Year Warranty
PRECISION DIGITAL CORPORATION
Panel Mount
MULTI-CHANNEL CONTROLLER
www.predig.com
Advertisement
Table of Contents
Related Manuals for Precision Digital Corporation ConsoliDator+
Summary of Contents for Precision Digital Corporation ConsoliDator+
- Page 1 Math Functions: Sum, Diff, Average, Multiply, Divide, % Efficiency, & More • Display Direct Modbus PV Inputs – Slave Mode • RS-485 Modbus RTU Standard & Ethernet Modbus TCP/IP Optional • Free ConsoliDator+ Configuration Software • 3 Year Warranty www.predig.com PRECISION DIGITAL CORPORATION...
-
Page 2: Main Screen
PD9000 Multi-Channel Controller OVERVIEW The ConsoliDator+ is a multi-channel controller that is both easy to use and satisfies a wide variety of process display, alarm and control applications. It accepts 4-20 mA inputs, flow meter pulse inputs, digital inputs, and Modbus RTU inputs and displays them both in numeric and bargraph format on a large, 5.7"... -
Page 3: Inputs And Outputs
PD9000 Multi-Channel Controller INPUTS & OUTPUTS If all Input / Output slots are used exclusively for one function, the ConsoliDator+ can accept up to (28) isolated 4-20 mA and pulse inputs, (25) isolated 4-20 mA outputs, and (25) relays. See the Ordering Guide for standard configurations. In addition, the ConsoliDator+ has digital inputs and outputs and RS485 capabilities as standard and Ethernet as an option. - Page 4 PD9000 Multi-Channel Controller SETTING CHANNEL PARAMETERS What makes the ConsoliDator+ easy to program is its intuitive setup screens. As shown in the first image below, the setup screen allows you to see all the relevant information you need when creating or editing a channel - all on one screen! When creating a new channel, the channel number is auto-generated for you.
- Page 5 PD9000 Multi-Channel Controller INDIVIDUAL CHANNEL VIEW To view the details of any channel, press Menu and then press View – Channel. Select the channel of interest. Navigate through the different items using the navigation keys. A green bar indicates the selected item, press the R-key to step into and see more details about the inputs and outputs related to the channel in view.
-
Page 6: Ma Analog Input Connections
PD9000 Multi-Channel Controller CONNECTIONS 4-20 mA Analog Input Connections Power connections are made to one of the power terminal connectors. All units are capable of being powered either by AC Analog 4-20 Input connections are made to screw terminal or by DC for the ranges specified. connectors (two inputs per connector). -
Page 7: Analog Output Connections
PD9000 Multi-Channel Controller Flow Meter Pulse Input Connections Analog Output Connections Flow Meter Pulse Inputs are wired to four-terminal connectors The following figures show examples for isolated 4-20 mA (two inputs per connector). A square waveform is used in the transmitter output connections. - Page 8 PD9000 Multi-Channel Controller Relay Connections RC Networks Available from Precision Digital RC networks are available from Precision Digital and should Relay connections are made to three-terminal connectors be applied to each relay contact switching an inductive load. labeled individually. There are five relays per card. Part number: PDX6901.
-
Page 9: Specifications
PD9000 Multi-Channel Controller SPECIFICATIONS Except where noted all specifications apply to operation at 25°C (77°F) Backup Power Supply: If AC and DC power are connected, the 24 VDC can be used as backup power in case of AC power failure. General Fuse: Unit is protected internally with auto-resettable fuse. -
Page 10: Ma Analog Inputs
PD9000 Multi-Channel Controller 4-20 mA Analog Inputs Pulse Inputs Number of Inputs: (4) Analog inputs/card Number of Inputs: (4) Pulse inputs/card, (28) Pulse inputs max, (28) Analog inputs max, no other I/O no other I/O Typical Input: 4-20 mA Input Type: Active Square Wave, NPN, PNP, Reed Switch, Coil Input Range: 0-24 mA (Magnetic Pickup) Normal threshold: 1.2 V (0.8 to 3.0 V) - Page 11 PD9000 Multi-Channel Controller Totalizer Math Constant Assign fixed value Functions Number of Totalizers: Up to 32 totalizers, Summation Add two or more channels 15 digits with comma separator Difference Subtract any two channels Totalizer Inputs: Calculates total based on selected rate channel, Abs Difference Difference always positive pulse input, digital input, or trigger event for non-rate channels.
-
Page 12: Modbus ® Serial Communications
PD9000 Multi-Channel Controller Digital Inputs & Outputs 4-20 mA Transmitter Outputs Digital Inputs: 5 Inputs, non-isolated, 30 VDC max Number of Analog Outputs: (5) Analog outputs/card, (35) Analog outputs max with no other I/O cards (Seven I/O slots) Standard feature on all ConsoliDator+ models Output Range: 4.00 to 20.00 mA, nominal Low: 0 to 1.2 V Calibration: Factory calibrated for 4-20 mA... -
Page 13: Overall Dimensions
PD9000 Multi-Channel Controller DIMENSIONS Overall Dimensions Units: Inches (mm) 10.85 (276) 4.87 (124) 10.85 (276) Panel Mount Controller 8.03 (204) 11.48 (291) 12.0 (305) Field / Wall Mount Controller www.predig.com... -
Page 14: Ordering Information
PD9000 Multi-Channel Controller ORDERING INFORMATION General Purpose Panel Mount Models Model Pulse Inputs 4-20 mA 4-20 mA Relays Inputs Outputs PD9000-GP-4AI PD9000-GP-4AI-10RY PD9000-GP-4AI-5AO-10RY PD9000-GP-4AI-20RY PD9000-GP-4AI-5AO-20RY PD9000-GP-8AI PD9000-GP-8AI-10RY PD9000-GP-8AI-10AO-10RY PD9000-GP-8AI-20RY PD9000-GP-8AI-25RY PD9000-GP-12AI PD9000-GP-12AI-20RY PD9000-GP-12AI-10AO-10RY PD9000-GP-16AI PD9000-GP-16AI-15RY PD9000-GP-16AI-15AO PD9000-GP-20AI PD9000-GP-20AI-10RY PD9000-GP-20AI-10AO PD9000-GP-24AI PD9000-GP-24AI-5RY PD9000-GP-24AI-5AO PD9000-GP-28AI... - Page 15 PD9000 Multi-Channel Controller General Purpose Field/Wall Mount Models Model Pulse Inputs 4-20 mA 4-20 mA Relays Inputs Outputs PD9000-GF-4AI PD9000-GF-4AI-10RY PD9000-GF-4AI-5AO-10RY PD9000-GF-4AI-20RY PD9000-GF-4AI-5AO-20RY PD9000-GF-8AI PD9000-GF-8AI-10RY PD9000-GF-8AI-10AO-10RY PD9000-GF-8AI-20RY PD9000-GF-8AI-25RY PD9000-GF-12AI PD9000-GF-12AI-20RY PD9000-GF-12AI-10AO-10RY PD9000-GF-16AI PD9000-GF-16AI-15RY PD9000-GF-16AI-15AO PD9000-GF-20AI PD9000-GF-20AI-10RY PD9000-GF-20AI-10AO PD9000-GF-24AI PD9000-GF-24AI-5RY PD9000-GF-24AI-5AO PD9000-GF-28AI PD9000-GF-4PI PD9000-GF-4PI-5AO...
- Page 16 Digital Corporation makes no representations or warranties with respect to the contents hereof, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. ©2019 Precision Digital Corporation. All rights reserved. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov...
Need help?
Do you have a question about the ConsoliDator+ and is the answer not in the manual?
Questions and answers