Smart Track - dji MATRICE 350 RTK User Manual

5. The latitude and longitude of the target.
6. The horizontal distance between the target and the aircraft.
• RNG positioning is limited by factors such as the GNSS positioning accuracy and
gimbal attitude accuracy. The GNSS position, horizontal distance, Navigation Display,
and AR projection are provided for reference only.
• When the zoom camera is aiming, the cross hairs will be an upright cross, while with
the wide-angle camera or thermal camera it will turn into an X.

Smart Track

Introduction
When operating the H20 series gimbal camera, the pilot can use Smart Track to identify, lock
and track targets such as people, vehicles, boats, or other objects. After recognizing and locking
the target, it will automatically rotate the gimbal to situate the target in the center of the screen,
and adjust the camera focal length to an appropriate focus rate to track and view the target.
• When the tracked target is set to objects, the tracking effect will be limited.
• Use Smart Track in an open environment to avoid blocking the target.
• When the aircraft is returning to the Home Point, landing or set to T-mode, Smart
Track will be disabled. The device will exit Smart Track immediately in any of the above
situations.
Identifying and Locking a Target
Smart Track can be enabled after entering zoom view in the app.
1
2
1. Tap to start or stop Smart Track.
2. The feature identifies a person, vehicle, or boat as the target. Alternatively, you can gesture
on the screen to select another object as the target.
MATRICE 350 RTK User Manual
©
2023 DJI All Rights Reserved.
93