Landing Protection - dji MATRICE 350 RTK User Manual

MATRICE 350 RTK User Manual
• Obstacle Sensing is disabled during RTH descent. Proceed with care.
• To ensure the aircraft flies forward to the Home Point, the user is unable to rotate the
aircraft during RTH while the vision system is enabled.
• The aircraft cannot avoid obstacles beside or behind it.

Landing Protection

Landing protection is activated during auto landing and is executed as follows:
1. The aircraft will land directly if landing protection determines the ground is suitable for
landing.
2. If the ground is determined unsuitable for landing, the aircraft will hover. A prompt will
appear in DJI Pilot 2 pending the next action by the user. The aircraft will start descending
only when the battery level drops to 0%. During this process, the user can still control the
orientation of the aircraft.
3. If landing protection is not functioning, DJI Pilot 2 will display a landing prompt when the
aircraft descends below 0.7 m (2.3 ft) above the ground. After making sure the environment
is suitable for landing, tap to confirm or push the throttle stick all the way down and hold for
one second, and the aircraft will land.
Landing protection will not work in the following circumstances:
• When the downward vision system is disabled.
• When the user is operating the pitch/roll/throttle stick (landing protection will be re-
activated when the control stick is not in use).
• When the positioning system is not functioning properly (e.g., position drift errors).
• When the vision system needs calibrating.
• When the lighting is too dim for the vision system to operate.
24
©
2023 DJI All Rights Reserved.
Approx. 5 meters
Approx. 20 meters