Checking Battery Level; Hot Battery Replacement; Warming The Battery - dji MATRICE 350 RTK User Manual

Checking Battery Level

Press the battery level button to check the current battery level when the power supply is off.
After turning on the power, check the current battery level in the top bar of the app.
The Battery Level Indicators will also show the current battery level during discharging.
The indicators are defined below.
: LED is on.
LED1 LED2

Hot Battery Replacement

After landing, the aircraft does not have to be powered off for replacement of its batteries. First,
insert a fully charged battery and wait for three seconds before inserting another battery.

Warming the Battery

Manual Heating: if the Intelligent Flight Battery is not installed into the aircraft, press and hold
the battery level button on the battery for four seconds to initiate the self-heating, keeping the
batteries at a temperature between 16° C (61° F) and 20° C (68° F), which is the ideal range of
operating temperature, for approximately 30 minutes. Press and hold the battery level button
for two seconds to stop heating.
Auto Heating: insert the batteries into the aircraft and power it on. If a low battery temperature
is detected, the battery will automatically heat up to maintain a temperature between 16° C (61° F)
and 20° C (68° F).
• The performance of the intelligent Flight Battery is significantly reduced when flying in
low temperature environments (temperatures below 5° C). Ensure that the battery is
fully charged before each flight.
: LED is off.
LED3 LED4
MATRICE 350 RTK User Manual
: LED is flashing.
Battery Level
88%~100%
75%~87%
63%~74%
50%~63%
38%~49%
25%~37%
13%~24%
0%~12%
©
2023 DJI All Rights Reserved.
73