Configuration: Special Functions: Changing The Codes/Language - Siemens ULTRAMAT 23 Series Equipment Manual

8.4.2.1

Configuration: Special functions: Changing the codes/language

Code 1 :
Code 2 :
Language: italiano
ULTRAMAT 23
Equipment Manual, 04/2022, A5E37100388-012
In the first two lines of this dialog, you can change the codes of
111
the two code levels 1 and 2 (see also section Code levels
222
(Page 95)).
The factory settings for the two code levels are:
8421
• Code level 1: 111
• Code level 2: 222
You can also reduce the number of code levels by assigning the
same code to both levels.
Letters and special characters can also be used for the code, in
addition to numbers.
The modified codes are effective immediately. You should there‐
fore make a note of the changed codes and keep this at a safe
place.
In the third line of this dialog you can change the language of the
input dialogs. The analyzer is designed for the following languag‐
es:
• German
• English
• Spanish
• French
• Italian
• Polish
A change is immediately effective when you leave this dialog.
Functions
8.4 Configuration
145