Function - Siemens ULTRAMAT 23 Series Equipment Manual

Description

3.3 Function

Note
Energy saving
The display brightness is reduced after approx. 30 minutes without an operation. This serves for
energy saving and has no influence on the other properties of the device.
The display becomes bright again when you continue with operation.
Inputs and outputs
• Three binary inputs for switching the sample gas pump on and off, triggering of AUTOCAL,
and synchronization of several devices.
• Eight freely-configurable relay outputs for faults, maintenance requests, maintenance
switches, limits, measuring range identifications, and external solenoid valves.
• Analog outputs for each component electrically isolated from analyzer ground.
• Optional: 8 additional relay outputs.
• Optional: 8 additional binary inputs.
Communication
ELAN (RS485) present in basic unit.
Options:
• RS485/USB converter
• RS485/RS232 converter
• RS485/Ethernet converter
• Incorporation in networks via PROFIBUS DP/PA interface (via option board)
• SIPROM GA software as servicing and maintenance tool, also applicable for continuous
digital data acquisition
3.3 Function
Several independent measuring principles which work selectively may be present in the
ULTRAMAT 23. These are described below.
24
Equipment Manual, 04/2022, A5E37100388-012
ULTRAMAT 23