Table of Contents
Advertisement
Installation
Repackage the Instrument and Accessories
Refer to the drawing on page 16.
Place the foam corner cubes into the bottom of the shipping box.
1.
Place the reader inside the original plastic bag. Set the reader into the foam
2.
cubes in the bottom of the box.
Slide the packing sleeve over the reader.
3.
Touchscreen models: If you are using replacement packaging materials, remove the two
pullouts so the sleeve fits over the touchscreen:
Place the accessory tray in the box. Place accessories in the tray as shown below:
4.
Close the box. Secure it with shipping tape.
5.
Agilent BioTek Epoch 2 Instructions for Use
1771011I Revision C
Page 22 of 51
Agilent Technologies, Inc.
Advertisement
Table of Contents
