ABB TZIDC-210 Operating Instructions Manual page 59

TZIDC-210, TZIDC-220 DIGITAL POSITIONER | OI/TZIDC-210/TZIDC-220-EN REV. G
Para- Display Function
meter
P7.5 GOPULS DOWN Go pulse, down
P7.6 Y-OFS UP
Y offset, up
P7.7 Y-OFS DN
Y offset, down
P7.8
P7.9 TOL_BAND Tolerance band (zone)
P7.10 TEST Test
P7.11 EXIT
Return
P8._, P9._,
P10._
P11._ FS / IP
P11.0 FAIL_POS Save position
P11.1 FACT_SET
Factory setting
P11.2 IP-TYP
I/P module type
P11.3 EXIT Return
* Activation by ABB Service only
Note
For detailed information on the parameterization of the device, consult the associated configuration and parameterization
instructions.
Y offset (up)
Y offset (down)
Tolerance band (zone)
Test
Return to operating level
Safe position
Factory setting
Type of l/P module
Return to operating level
Possible parameter setting
0 to 200
Y-Min to 100.0
Y-Min to 100.0
0.3 to 10.0
Function
Function
ACTIVE, INACTIVE
Function
NO_F_POS,F_SAFE_1,F_SAFE_2,
F_FREEZE1, F_FREEZE2
Function
59
Unit Factory setting
msec 0
% 40.0
% 40.0
--- ---
% 0.8
--- INACTIVE
--- NV_SAVE
--- INACTIVE
--- ---
--- NO_F_POS
--- ---