Table of Contents
Advertisement
Changing the cooking time
- Remaining cooking time can be changed at any time during cooking.
- Touch the power-off timer key (K) to select the timer display for the desired cooking
zone. The relevant indicator light (L1) will flash.
- Touch the (L) or (M) key to set a new desired cooking time.
Displaying the remaining cooking time
If several timer settings are activated, remaining cooking time can be displayed by
touching the (K) key.
Timer reset
- Select the desired timer display by pressing the (K) key (see section Changing the set
cooking time). The set timer will be displayed and the indicator light for the relevant
cooking zone will light up.
- Touch the (M) key to set the value to »00«, or press the (L) and (M) keys simultaneously
to immediately reset the value to »00«.
PAUSING THE COOKING PROCESS WITH
STOP & GO
The STOP & GO function allows you to pause (or suspend) the cooking process, but keep
all your settings.
To pause the cooking process, touch the STOP & GO key (F). An indicator light (F1) will
light up above the key. Settings on the displays will start to flash. All settings are frozen,
and the cooking zone are not heated (the heaters are switched off).
All keys except on/off and STOP & GO are inactive.
To deactivate the STOP & GO function, touch the STOP & GO key again. Indicator light
(F1) will switch off.
If the STOP & GO function is not switched off, the entire hob will automatically switch off
after 10 minutes.
OVERHEAT PROTECTION
- The hob is fitted with a cooling fan that cools the electronic components during
cooking. The fan may operate for a while even after the end of the cooking process.
- Induction cooking hob is also fitted with an overheating protector that protects the
electronic components from damage. The protector operates at several levels.
When the cooking zone temperature gets very high, the cooking power is automatically
reduced.
If this does not suffice, the cooking zone power continues to decrease, or the safety
mechanisms switches off the cooking zone completely. In such case, the display unit
will read »«F2««. When the cooking hob is cooled down, its total power will be available
again.«
23
Advertisement
Table of Contents
