Table of Contents
Advertisement
INSTALLING A BUILT-IN HOB
- Use of solid wood corner trims on worktops behind the cooking zone is only allowed if
the clearance between the trim and the cooking hob is no smaller than indicated on the
installation plans.
- If the thickness of your counter top exceeds 35-50 mm, then the opening for the hob
should be made in the middle of the oven, with suffi cient clearance from the front edge
of the counter top so that the induction hob does not touch the oven shield.
30cm
300
520
min 20
54
283-285
40
50
min 40
490-492
min 50
min 600
33
Advertisement
Table of Contents
