User Settings - Hisense I6421CB Instructions Manual

USER SETTINGS

SETTING THE ACOUSTIC SIGNAL AND LOCK PARAMETERS
You can adjust the volume of the acoustic signal, duration of acoustic alarm, total
maximum appliance power, and automatic lock settings.
To activate the parameter settings menu, press the pause key (F) when the appliance is
switched off, and hold it for 3 seconds.
The first parameter "Uo" will appear on the timer display, indicating the volume (loudness)
of acoustic signals. Press the timer key (K) to select the type of parameter. Press the timer
setting keys (L) and (M) to adjust the parameter.
Uo – acoustic signal and alarm volume (loudness)
So – alarm duration
Lo – Automatic lock
Au: Automatic pan recognition
Po – Total maximum power
The currently set parameter value will appear on the right-hand side cooking zone power
level displays. The value can be adjusted by pressing the (H) or (I) keys for the cooking
zone.
All parameters can be confirmed and stored by pressing and holding the pause (F) key for
2 seconds. Then, a short beep will be heard. If you do not wish to store the new parameter
settings, close the user settings mode by pressing the on/off key.
Acoustic signal and alarm volume (loudness) »Uo«
The following values can be set:
00 on the display = off (does not apply to alarm and error acoustic signal)
01 on the display = minimum volume
02 on the display = medium volume
03 on the display = maximum volume (default)
A short acoustic signal will be sounded upon every change, with the newly set volume.
27