Bridged Cooking Zone (Depending On The Model) - Hisense I6421CB Instructions Manual

Ceramic built-in induction cooking hob
Table of Contents

Advertisement

BRIDGED COOKING ZONE
• Some models allow combining two cooking zones into a single large connected cooking
zone. Thus, a large oval pan or a griddle can be placed on the combined cooking field.
The pan has to be large enough to cover the centres of the upper and lower cooking
zone.
• Maximum pan size: 40 x 25 cm. For even heat distribution, we recommend using a
heavy-bottom baking dish or pan. During cooking, the dish or pan will heat up. Be
careful to prevent burns.
• When placing the baking dish on the hob, make sure it does not cover the control
module.
A1 A
B
H
Deactivating the bridged cooking zone
• Reduce the power of the bridged zone to
and heating will be switched off.
• Both cooking zones will operate independently.
Activating the bridged cooking zone
• Switch on the cooking hob by pressing
the on/off sensor (A).
• Simultaneously touch the two sensors
and hold them for 3 seconds (H). The sign
rear field to indicate that the two cooking
zones are bridged.
I
H
I
• Set the desired cooking power for the
bridged cooking zone.
• To change the bridged zone's cooking
power later on, use the (H) or (I) key for
the lower cooking zone.
Note: The bridged zone does not allow
the Rapid Boil setting P. Maximum
available power level is 9.«
0.
The bridged zone symbol
(depending on the model)
will appear on the display unit for the
will disappear
17

Advertisement

Table of Contents
loading

Table of Contents