Table of Contents
Advertisement
•
Select the desired timer display by pressing the (D) key (see section Changing the set cooking
time). The set timer will be displayed and the indicator light for the relevant cooking zone will light
up.
•
Touch the
(M) key to set the value to "0" , or press the
to immediately reset the value to "0" .
Pausing the cooking process with Stop&Go
The Stop&Go function allows you to pause (or suspend) the cooking process, but keep all your settings.
To pause the cooking process, touch the Stop&Go key (C). An indicator light (C1) will light up above
the key. Settings on the displays will start to flash. All settings are frozen, and the cooking zone are
not heated (the heaters are switched off).
All keys except on/off and Stop&Go are inactive. To deactivate the Stop&Go function, touch the
Stop&Go key again. Indicator light (C1) will switch off.
If the Stop&Go function is not switched off, the entire hob will automatically switch off after 10 minutes.
Memory function
The memory function allows restoring the most recently selected settings in 5 seconds after the hob
is switched off. This is convenient when, for example, you accidentally press the on/off key and switch
off the entire hob, or if the cooking hob is switched off automatically due to some spilt liquid.
After switching off with the on/off key, you have 5 seconds to switch the control panel back on, and
further 5 seconds to press the SStop&Go key to restore your settings. During these 5 seconds, the
indicator light above the settings restore key will flash. All settings active before the hob was switched
off will be restored.
Automatic switch off
If the keys are activated for too long during cooking (e.g. due to spilt liquid or an object placed over
the sensor keys), all cooking zones will be switched off after 10 seconds. The symbol
the display. The object should be removed, or the spilt liquid should be cleaned, from the sensor keys
within 2 minutes; otherwise, the cooking hob will switch off automatically. The most recent settings
can be restored with the memory function using the Stop&Go key
Switching off the cooking zone
To switch off a cooking zone, use the relevant
the cooking zone, touch the relevant
"0" .will be displayed on the display unit.
If the power of all cooking zones is set to "0" ., the cooking zone will switch off automatically after
a few seconds.
Residual heat indicator
As soon as a hot cooking zone or the entire cooking hob is switched off, the following will be displayed:
•
"H" cooking zone is hot;
How long this will be displayed depends on the power level and on how long a cooking zone was
activated. When the "H" sign disappears, the cooking zone may still be hot in some cases (power
failure, a hot pan left on the cooking zone etc.). Be careful as there is danger of burns! In case of a
power failure while the cooking zones are still hot, the "H" sign will flash on the display. This indicates
that the cooking zone may or may not be hot, depending on the duration of the power failure.
key to set the value to "0" . To quickly switch off
and
keys simultaneously. You will hear a short beep, and
(N) and
(M) key simultaneously
will flash on
15
Advertisement
Table of Contents
